How to unload the garbage from the dustbin when the sweeper is finished

 Street sweeperThe garbage can has the dumping function, how to correctly unload the garbage of the garbage can after the completion of the operation？

    First, open the power supply of the control box, start the auxiliary engine, and make the engine in idle state

    Second, point the control button at the trash can“升”Working position

    Step three, point the rear door control button“升”According to the Angle of the car tilt, the control key can be pointed to the middle position at any time, and the car tilt will stop。

    Step four, flip the back door switch, and the trash will dump itself。

    The fifth step, after the garbage is dumped by itself, rinse the inner wall of the suction tube and the connecting pipe between the suction cup and the garbage bin with clean water, so as not to affect the service life and cleaning effect。

    Step six, will“dustbin”The control button points to the falling position, and the control button points to the middle position after the carriage is completely returned。(Note: Please check whether the safety bracket is closed when the dustbin is falling)

    Step 7, point the back door control key to the closed position, and then point the knob to the middle position after the back door is closed

    Step 8, clean up the garbage is over